TDM-700

Category:

Description

TDM-700 POV Camera Links HD-SDI, Data, Ethernet, Genlockpdf
tdm-700The TDM-700 system is designed to provide a compact, rugged and cost effective optical link between a remote POV (Point of View) Camera and an OB van or Control Room.

The link provides an HD/SD-SDI feed from the camera and a reverse composite video feed for genlock or monitoring plus bi-directional RS232 and RS422 data for full control of the POV.

A 10/100 BaseT Ethernet link is provided to allow control of IP based devices while a GPI path can be used to drive a tally light. All signals are multiplexed and transported over two fibres for easy installation or field deployment.

The TDM-700CE remote camera end is supplied in a compact aluminium enclosure with a choice of connectors to suit both Studio and Outside Broadcast applications.

The TDM-700B base unit fits in a single slot of the standard Bluebell 19″ rack frame allowing multiple cameras to feed into a central control room or truck.

Alternatively, both ends can be supplied in the standard BC Series card format for cost effective transport of HD, composite video and data whether in a studio or flyaway. They are particularly suited for linking remote video servers to slow motion controllers with the Ethernet used for PC configuration of the server.

TDM-700 links are available in multimode, singlemode, WDM and CWDM to suit any application.

Schematic Diagram
schematic End panel
Specifications for each channel
Electrical HD/SD Input
Connector 75 Ohm BNC per IEC 60169-8 Amendment 2
Standards SMPTE 292M, SMPTE 259M, SMPTE297M
Equalisation Automatic to 200 m @ 1.485 Gb/s
Automatic to 300 m @ 270 Mb/s
Return Loss > 15 dB @ 1.485 Gb/s
Electrical HD/SD Output
Connector* 75 Ohm BNC per IEC 60169-8 Amendment 2
Return Loss > 15 dB @ 1.485 Gb/s
Polarity Non inverting
Signal Level 800 mV +/- 10%
DC Offset 0 +/- 0.5 V
Jitter <0.15 UI line equalised
Electrical Genlock Video Input and Output
Standards Composite 1V pk-pk PAL, NTSC, SECAM Bi-Level, Tri-Level syncs
Connector 75 Ohm BNC
Diff. Phase < 1°
Diff. Gain < 1% (at sub-carrier 3.58/4.43 MHz)
Ethernet Input/Output
Connector RJ45
Format Full duplex 100Base-FX Data Transmission with 1-/100 MB/s half/full duplex auto-negotiation
Data Input/Output
Connector D sub
Format 1 x bidirectional RS232, 1 x bidirectional RS422
1 x bidirectional GPI
General TDM-700B/LC card specifications
Depth: 60 mm
Width: 20 mm 4TE
Height: 129 mm (3RU)
Weight: 100 g
Operating Temp: -30 to +70 ºC
Power: 6 W
Signal detect: LED on for loss of signal
No of slots: 1
General TDM-700CE/NOC and /L3K specifications
Depth: 160 mm
Width: 120 mm 4TE
Height: 45 mm (3RU)
Weight: 200 g
Conformance
EMI/RFI: Complies with 89/336/EEC
Electrical: Complies with EN 61000-6-1, EN61000-6-2
Laser Safety Complies with Class 1 laser product
24 CFR 1040.10 & 1040.11
RoHS: Complies with Directive 2002/95/EC
Warranty: 5 years
Optical Input/Output
Connector See Ordering Information
Wavelength 850 nm, 1310 nm, 1550 nm,
Optical Power -2 dBm @ 1310 nm (typical)
-2 dBm @ 1510 nm and CWDM (typical)
Sensitivity > -25.5 dBm @ 1.485 Mb/s
> -26.0 dBm @ 270 Mb/s
Ordering Information
TDM-700CE/xx Remote end singlemode HD-SDI transmitter, Genlock receiver with bidirectional 232/422 Data and 10/100
BaseT on 2 fibres. Supplied in rugged aluminium enclosure fitted with 4 pin XLR for power.
TDM-700BE/xx Base end singlemode HD-SDI receiver, Genlock transmitter with bidirectional 232/422 Data and 10/100
BaseT on 2 fibres. Supplied in rugged aluminium enclosure fitted with 4 pin XLR for power.
Key /xx Use /L3K Lemo 3K Series SMPTE Hybrid Connector *
Use /NOC Neutrik OpticalCON DUO Hybrid Connector *
Use /LC Standard LC connectors provided via SFP module
* For alternate hybrid connectors please contact the Sales Office.
TDM-700C/LC Remote end singlemode HD-SDI transmitter card, Genlock receiver with bidirectional 232/422 Data and 10/100 BaseT on 2 fibres. Fitted with LC connectors as standard. Fits into standard Bluebell BC Series frames.
TDM-700B/LC Base end singlemode HD-SDI receiver card, Genlock transmitter with bidirectional 232/422 Data and 10/100 BaseT on 2 fibres. Fitted with LC connectors as standard. Fits into standard Bluebell BC Series frames.
For Dedicated CWDM Tuned Laser Wavelengths to suit ITU Grid Spacing available – see CWDM Ordering Matrix
Universal Chassis and Power Supplies
BC100-3RU 19″ 3RU Chassis for up to 15 BCxxx Cards with optional Network Monitoring and
facility for Dual Redundant Power Supplies (not supplied).
BC160 19” 1RU Chassis for u to 6 BCxxx Cards. Includes Dual Redundant Power Supplies with optional Network Monitoring.
BM100 Network Monitoring Card with GPI Output on a SCSI Connector for Slot-16
BM101 Network Monitoring Card with Ethernet connection for Slot-16