BC313T_L

Category:

Description

BC313T/L Electrical to Optical Transmitter 3G-SDI, HD-SDI, SD-SDI,ASIpdf icon

The BC313T/L is a transmitter module for the conversion of 3G-SDI, HD-SDI, SD-SDI and ASI signals into fibre optical cable. The incoming signal is auto-sensed and then equalised and reclocked prior to conversion and transmission down a single optical fibre. A loop out is provided for signal monitoring or distribution.

Each BC313T/L is housed in a compact robust enclosure and is designed for Outside Broadcast and special events as well as Studios. Power is provided via the optional PS10/XLR unit The PS10/XLR has an IEC mains inlet allowing
easy adoption into standard equipment bays. The BC313T/L has a 4 pin XLR allowing power from a variety of external DC sources in the range 4.5 to 17 V.

The BC313s are extremely compact single channel fibre optic converters that are perfectly suited to provide interference free transmission and for extending the range of electrical signals, particularly HD-SDI and 3G-SDI signals.

Each channel can operate in non-reclocking mode and handles data rates from 50 Mb/s to 3 Gb/s.

The BC313T/L is available in singlemode, WDM and CWDM variants to suit any fibre application.
The BC313T/L can also be used to interface to any of the standard Bluebell cards and enclosures.

Schematic Diagram
schematic
Specifications for each channel
Electrical Input
Standards SMPTE 424M, SMPTE 292M, SMPTE 259M,
SMPTE 297M, DVB-ASI
Equalisation Automatic to 100 m @ 3 Gb/s
Automatic to 200 m @ 1.485 Gb/s
Automatic to 300 m @ 270 Mb/s
Equaliser and reclocking can be bypassed to support
data rates down to 50 Mb/s
Connector 1 x 75 Ohm BNC per IEC 60169-8 Amendment 2 per channel
Return Loss > 15 dB @ 1.485 Gb/s
Format Reclocked
(with bypass to support data rates down to 50 Mb/s)
Please note that the factory default unless specified is
for units to be supplied in reclocking mode.
Non-reclocking settings are accessed via module pcb.
Electrical Output
Standards SMPTE 424M, SMPTE 292M, SMPTE 259M,
SMPTE297M, DVB-ASI
Automatic rate selection for 3G-SDI, HD-SDI and
SD-SDI data rates.
Connector 1 x 75 Ohm BNC per IEC 60169-8 Amendment 2
Return Loss > 15 dB @ 1.485 Gb/s
Polarity 1 x Non inverting
Signal Level 800 mV +/- 10%
DC Offset 0 +/- 0.5 V
Jitter <0.15 UI line equalised
Format Reclocked
Optical Output
Connector 1 x female LC
Wavelength 1310 nm, 1550 nm,
See Ordering Informationn
Optical Power -2 dBm @ 1310 nm (typical)
-2 dBm @ 1510 nm (typical)
0 dBm @ CWDM (typical)
General card specifications
Length: 92 mm
Width: 64 mm
Height: 30 mm
  Excluding connectors
Weight: 100 g
Operating Temp: -30 to +70 ºC
Power: 2.5 W
Voltage 4.5 to 17 V dc
Signal detect: LED on for loss of signal
Conformance  
EMI/RFI: Complies with 89/336/EEC
Electrical: Complies with EN 61000-6-1, EN61000-6-2
Laser Safety Complies with Class 1 laser product
24 CFR 1040.10 & 1040.11
RoHS: Complies with Directive 2002/95/EC
Warranty: 5 years
bc323r_end
Ordering Information
BC323T/M Multimode Dual Channel 3G/SDI, HD/SDI Fibre Optic Transmitter Module, Auto-Sensing for SDI, ASI, HD/SDI and 3G/SDI (850nm). Fitted with LC connectors. PS12 power supply ordered separately.
BC323T/S/13/13 Singlemode Dual Channel 3G/SDI, HD/SDI Fibre Optic Transmitter Module, Auto-Sensing for SDI, ASI, HD/SDI and 3G/SDI (1310nm). Fitted with LC connectors. PS12 power supply ordered separately
BC323T/S/13/15 Singlemode Dual Channel 3G/SDI, HD/SDI Fibre Optic Transmitter Module, Auto-Sensing for SDI, ASI, HD/SDI and 3G/SDI (1310nm and 1550nm). Fitted with LC connectors.
PS12 power supply ordered separately.
BC323T/S/CWDM Singlemode Dual Channel 3G/SDI, HD/SDI Fibre Optic Transmitter Module, Auto-Sensing for SDI, ASI, HD/SDI and 3G/SDI. (Dedicated CWDM Tuned Laser, Wavelength to suit ITU Grid Spacing – see CWDM Ordering Matrix). LC connectors as standard. PS12 power supply ordered separately.
PS12 10 watt Plugtop PSU for the BC313/323/550 Product Range. Fitted with 4 pin XLR.
Voltage range 100-240 V ac 50/60 Hz
The BC323 can also be supplied in an “extended” enclosure with ST connectors — add /ST to the end of the part numbers above.