BN367 3G-SDI, Talkback Audio, Duplex Datapdf

Expanding upon the successful BlueNano range the BN367 is designed for the cost effective transport of signals to/from a remote camera position over fibre. Based around field proven technology the rugged units provide the transport of SDI, audio and duplex data signals over a dual fibre link.

The BN367 is ideally suited for use with a range of ultra slow motion POV cameras.

Supplied in a robust aluminium enclosure with Lemo 3k93C connectors fitted as standard the BN367 is designed for the rigours of Outside Broadcast applications.
(Alternative connectors are easily supplied.)

Each signal within a fibre core has a different optical wavelength, enabling interference free transmission over longer distances.

Power is provided via the compact PS12 unit. Each BN367 has a 4 pin XLR allowing the freedom to provide power from a variety of external DC sources in the range 4.5 to 17 V.
Units can be used in conjunction with any standard Bluebell frame or enclosure allowing a remote BN367T in the field to integrate easily with a 19” frame in the OB truck.

Schematic Diagram

schematic

schematic

Specifications
BN367T Electrical Input Video
Standards SMPTE 424M, SMPTE 292M, SMPTE 259M, SMPTE 297M, DVB-ASI
Equalisation Automatic to 100 m @ 3 Gb/s
Automatic to 200 m @ 1.485 Gb/s
Automatic to 300 m @ 270 Mb/s
Connector 2 x 75 Ohm BNC to IEC 60169-8 Amendment 2
Return Loss > 15 dB @ 1.485 Gb/s
Format Reclocked
BN367T Optical Input/Output
Connector 1 x Lemo 3k93C Panel Socket
BN367R Optical Input/Output
Connector 1 x Lemo 3k93C Panel Plug
Wavelength

1310 nm, 1550 nm muxed onto each fibre

Optical Power -3 dBm @ 1310 nm (typical)
Sensitivity > -22 dBm @ 3 Gb/s (typical)
Max I/P power > -1 dBm
BN367R Electrical Output Video
Standards SMPTE 424M, SMPTE 292M, SMPTE 259M, SMPTE 297M, DVB-ASI
Automatic rate selection for 3G-SDI, HD-SDI and SD-SDI data rates.
Connector 2 x 75 Ohm BNC to IEC 60169-8 Amendment 2
Return Loss > 15 dB @ 1.485 Gb/s
Signal Level 800 mV +/- 10%
DC Offset 0 +/- 0.5 V
Jitter  
Format Reclocked
Electrical Input/Output Audio and Data
Connector 44 pin D type
Format 2 x analogue audio1, 20 Hz– 20 kHz ± 0.3 dB
2 x RS232 Duplex
2 x RS422/485 Duplex
2 x GPI Duplex
General card specifications (excluding connectors)
  BN367T BN367R
Length: 134 mm 134 mm
Width: 109 mm 109 mm
Height: 30 mm 45 mm
Weight: 200 g
Operating Temp: -30 to +70 ºC
Power: 2.5 W
Voltage: 4.5 to 17 V dc
Conformance  
EMI/RFI: Complies with 89/336/EEC, EN55022B,
EN61000-4-2, EN61000-4-4-(Level 2), EN61000-4-4FTB,
EN61000-4-5, EN61000-4-11
Electrical: Complies with EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4
Laser Safety Dependent on SFP fitted.
Complies with Class 1 laser product
RoHS: Complies with Directive 2002/95/EC
Warranty: 5 years
 
Ordering Information
BN367T/S/L3K Singlemode Dual Channel 3G/SDI, HD/SDI Fibre Optic Transmitter Module, Auto-Sensing for SDI, ASI, HD/SDI and
3G/SDI. Also provides 2 x analogue audio1 in each direction plus duplex RS data.
PS12 power supply ordered separately.
BN367R/S/L3K Singlemode Dual Channel 3G/SDI, HD/SDI Fibre Optic receiver Module, Auto-Sensing for SDI, ASI, HD/SDI and 3G/SDI. Also provides 2 x analogue audio1 in each direction plus duplex RS data.
PS12 power supply ordered separately.
  Fitted with Lemo 3K SMPTE connectors as standard. Contact the Sales Office for alternatives.
1 Note audio is designed for talkback system – bandwidth 20 Hz – 20 kHz with amplitude restricted to +6 dBu.
Supplied with mating D type connector parts.

For all available enclosures and frames see section “Universal Chassis and Power Supplies”.